The good thing about bar tables is that they aren’t solely just for bars. They make a great seating arrangement in cafe’s, bistros, and even restaurants.CDG furniture is a bar table factory. So if you really want to mix and match your seating up a little, just how do you choose the perfect bar table for your needs?
Ideally each one of these should hold the same amount of weight and therefore should be considered equally. A well thought out space for example will give you maximum return on your seating, but it’s no good if your bar seating doesn’t fit into a theme that you have or worse still, simply isn’t practical for your needs.CDG furniture is a bar table manufacturers.
Bar table types
There are so many bar tables to choose from and made from a variety of materials. For an uber-modern contemporary look how about choosing glass. Even though it might seem sleek and modern and fit in well with a theme you’re trying to create there might well be practical considerations you may also need to look at before you splash the cash. Formica table tops are great for a retro look and come in all shapes and sizes, but they might not be practical especially if you want to use them outside as well as indoors. Wood is a timeless classic and has been the bar stool material of choice for many years. It isn’t going to stop the world with it’s design, but it’s not likely to offend anyone either. Do bear in mind however that it can be heavy to move around and mightn’t be weatherproof either. Finally how about Polypropylene? Yes the humble plastic table has been elevated in the last few years and now comes in all shapes, sizes, and colours. They can cost less that their glass, wood, or metal equivalents but are they as hard wearing as a metal table would be?
Does shape really matter?
The importance of choosing the right shaped bar table can never be over-estimated. Square bar tables for example offer the greatest amount of flexibility in terms of space because they sit flush into a corner for that degree of intimacy. However for areas where you have a multitude of nooks and crannies then a round table might fit the bill better. Generally speaking however, round tables do make passing space easier and as a result you’ll probably find that you can fit more more of them in. For best results successful cafes tend to mix and match the two giving the owner the ultimate balance between customer comfort and cost-effective seating arrangements.
When it comes time to rent chairs for your ceremony and/or reception, the myriad of options and styles from your local rental company might be a little overwhelming. Just keep in mind that the main goal is to choose a chair that best complements your wedding setting and overall aesthetic. To help you sort through the different options and decide which is the best for you, here’s a photo-filled guide to some of the most popular wedding-chair styles available.CDG furniture is a wedding chair Manufacturers.
Bentwood Chair: Modeled after the classic Thonet bentwood chair, this classic cafe-style chair is sophisticated yet relaxed, all at the same time. These chairs are best suited for outdoor venues like a vineyard or garden, or in more rustic and open-space settings like a tent, barn, or brick-walled loft.
Cross-Back Chair: This elegant farmhouse-style chair, with its curved lines and X-shaped back, is the perfect way to bring a classic, formal feel to a more rustic setting.
Elm, known as a “blockhead”, wood texture understanding clear, moderate tenacity, strength and hardness, smooth surface planing, the chord surface pattern is beautiful, is one of the main timber furniture. The wood features: Sapwood heartwood, sapwood narrow dark yellow, dark purple heartwood grey; light material is hard, high mechanical strength, straight texture, rough structure. The elm furniture high-end practical, elm table also very welcome.CDG furniture is a table top factory. Good furniture or learn to care, we will try to understand the maintenance method of elm furniture.
How to maintain the elm table top–make good use of covering
Here, “covering” is not to say that the table should be covered with a layer of cloth, but that should be installed in the room curtains objects, so that they do not suffer from the sun exposure. In fact, not only is the elm table, all in addition to teak wood table should avoid direct sunlight. If do not pay attention to the maintenance of the elm furniture of the sun, so the furniture will not only lose their original luster, affecting the decorative effect, but also let loose wood, slowly deformation or cracking. We still have to pay attention to maintenance of elm surface temperature, because the table elm density is low, so the shrinkage and swelling rate is relatively large, and the elm table are not painted, relatively easy to deformation.
How to maintain the elm table top–keep cleaning
The table need always wipping the table, elm is no exception. Due to the nature of elm mesa special, very easy to happen moth event, do so in the elm table maintenance to more often wipe. In the table we should wipe with a soft cloth carefully wipe down the elm texture itself, at the same time in order to decay, we can be put on the cloth insect repellent. Yes, Xiao Bian here to remind you, must not appear in the maintenance process of elm surface water, that is to say we can’t wipe the furniture directly with wet cloth. Because of this will make wood furniture damp swelling, the final deformation.
How to maintain the elm table top–keep Waxing
To solve the problem of how to maintain the old elm table must pay particular attention to the problem of waxing. The wax before we should use cotton cloth to wipe the furniture surface dust, like some stains we can be eliminated with a little alcohol. After waxing is the official, we should first coated with polishing wax, and then dry cloth slowly and evenly. In general, waxing frequency once a week is enough, should not be too frequent. At this time the elm table maintenance, we must be careful not to be overly friction furniture, to avoid damage to the twilight zone.
How to maintain the anti – elm table
Table maintenance and make sure the elm elm table because insects, flavor is sweet, so very popular borers welcome, so often the best general wipe, wipe with a soft texture, and then wipe down, put some amount of insecticide. Typically, a quarter of a waxing maintenance on Elm table, the table does not protect by moisture intrusion, but also protect the surface. Elm table maintenance should also note that the wood furniture are afraid of exposure, so to avoid prolonged exposure to sunlight.
The nice thing about buying a single desktop and table base is that you can mix and match a custom look that reflects the ambience of the restaurant.CDG furniture is a table base Manufacturers.
For example, you can match a wooden countertop to a stainless steel base for a modern industrial look, or combine a granite countertop with a gorgeous black cast iron base to create a classic style.CDG furniture is a table base factory.
At CDG Furniture, we offer a wide range of sizes, shapes and materials. All of our table stands are made of high strength structural steel or heavy cast iron.
A variety of options, which is more suitable for your mind it? Do not hesitate, let’s compare cast iron and iron legs. Below, we create a simple list to understand the pros and cons of the next two.
Cast iron legs:
In the long run, cast iron is strong, heavy and durable. Its surface texture effect is relatively coarse. We offer different styles of cast iron.
advantage:
Durable and heavy duty
We use an outdoor powder that is impervious to water and ensures that it does not rust
The color of the powder coating looks natural. Also welcome homemade color. We recommend the use of deeper non-gloss treatments, such as matte black or black, to hide the defects of cast iron.
Adjustable rubber stopper helps to eliminate swing. And is suitable for most models.
Con:
Although most of the color we can do powder, but some of the surface smooth light (such as white, silver, etc.) will show the natural defects of cast iron, we do not necessarily recommend
May require more careful cleaning, because the surface is not smooth.
Iron table base:
More concise and refined, stainless steel in the design and surface treatment have better flexibility, the advantages of a broader, applicable to a variety of styles of the table.
advantage:
Very durable
We use outdoor powder, with impermeable to ensure that it is not easy to rust;
Easy to clean. Just use warm soapy water and a clean towel.
The color of the powder coating looks very self-evident, also welcomed the custom colors.
The iron contains at least 30% of the regenerated component
Adjustable feet help to eliminate swing. Suitable for most models
Con:
The weight is large, making handling difficult
Sydney Sushizilla sushi restaurant interior design by the famous Vie Studio design studio meticulously completed, not into the restaurant, will be attracted to the wall colored box to Tetris-inspired design is very unique, red, yellow, blue and green four-color Throughout the space, it’s a very interesting restaurant.CDG furniture is a creative restaurant furniture factory.
Restaurant interior mosaic patterns and bright dining chair is very jumping, some compartment was made into the train compartment seat scene, hand-painted cartoon on the wall from SioriKitajima. Have to say there are dyed waste milk box, after the arrangement of design, full of creativity.CDG furniture is a creative restaurant furniture manufacturers.
The Perfect combination of industrial and Nodic style.
What kind of spark will be when the industrial style combine the Nordic style? Designer Denis Krasikov uses furniture and simple compartments, with a white wall to bring a quiet beauty. Nordic industrial loft, adding a little embellishment, will be able to show personality and vitality.CDG furniture is an industrial and nodic style furniture suppliers.
Without modification of the high ceiling and cultural stone building materials to combine, the Nordic style totally natural. Designers masterly in furniture, furnishings on the use of color embellishment space. The whole open space, just use a wall to divide space, this design is very suitable for single life of the owner.
Lively kitchen although stunning, but too fancy will bring visual fatigue. The white kitchen is simple and clean, with different decorative combination can show personality, enhance taste, shape light cooking attitude. The dining area is arranged in the living room, separated by a wall, and the lemon-yellow seats bring vitality to the space. CDG furniture is an industrial and nodic style furniture manufacturers.
The work area as an indispensable place of home, more should be taken seriously. The use of the corner of the windowsill to create a work area, so you in a relaxed atmosphere more into the work and rest.
The whole room gives plenty of space, but the designers still use some small corner to store clothes or daily necessities. Under the bed of the heightened admission, with a simple fabric set up clothing storage space, living room side of the wooden frame can also accommodate some books or decorations.
Along the stairs and on, is the bedroom, with a wooden frame to take out the bed back to nature. No extra modification, but showing a simple perfect, next to the coat rack to visit the owner often wear clothing, smooth lines, people look very comfortable.CDG furniture is an industrial and nodic style furniture factory.
Using the most classic black and white decorative bathroom, not only brings quiet atmosphere, but also bring a sublimation of the spirit. With some log material, retro bathtub, staircase decoration, so that space does not seem cold and monotonous.
If you take a common or garden bar stool and look at it purely from a design perspective it is in effect a heightened stool or chair that’s specifically made for using alongside a bar. However if you’ve ever looked into purchasing one, you’ll know that styles are both many and varied. CDG furniture is a bar stool manufacturers.So what should you be considering? Let’s take look…
Fitting in with your styling
Although bar stools come in a wide variety of colours, and materials there are basically just two designs. One that has a backrest and one that doesn’t. So it’s up to you to decide which is best for you and your clientele. The genius and grandfather behind the bar stool is Frenchman Xavier Pauchard and it’s fair to say that the vast majority of bar stools that you see today stem from his original designs. A style such as a galvanised steel bar stool combined with a stainless steel bar and some exposed brickwork and pipework will give your establishment that edgy industrial feel.
While the Original Tolix bar stool is still manufactured today some 80 years after it first graced the cafes of Paris it it might not be a cost-effective choice as they can be quite expensive. Instead there are various websites that offer very good quality replica Tolix bar stools for a fraction of the price of the original. If budget is one of your main concerns then you might want to go down this route instead.
Iron furniture has been favored by some consumers, but from the formation of a consumer boom is also a far cry from the reason is that people know little about wrought iron, Of consumer behavior. CDG furniture is an iron furniture manufacturer.Here are a few simple authentication techniques:
1.With a hard object in the furniture is not striking the corner of the percussion, such as striking exposed coins and the same color rather than rust, it is a special treatment of genuine, you can use 5 to 20 years without rust, to maintain the original color. The general products generally do not have this layer of special treatment, the general use to 3 years to lose the original color, become rusty.
2.High-grade iron furniture, welding point is not exposed.
3.Attention to detail, such as petals, leaves, branches delicate process, no broken marks. In addition, the iron furniture as a result of hand-made, is a heart to create a work, so they tend to have the personality of the manufacturer’s mood, if you have a certain artistic appreciation of vision, will be able to feel their spirituality.
Because a lot of people dining room and decorated in different styles, young people now want to and designer restaurant design companies on the differences, and most of the finished furniture is relatively popular in the design, it is difficult to meet the individual requirements of consumers, therefore, custom furniture has attracted more and more consumers welcome. In recent years, custom furniture has become a model of the design of the decoration, it is a low cost, agile operation of the rapid response to the needs of individual customers, have replaced the traditional furniture making momentum, loved by many owners. CDG furniture is a custom furniture factory.
Custom furniture customization process, everybody is familiar with, the general measurement design, production, transportation, complex scale installation, the entire process by the most professional designers, workers, and professional equipment factory, for consumers, the professional thing to professional people to do, to reduce the scene construction, decoration save time, ensure the quality of furniture, but also more customer service guarantee. CDG furniture is a custom furniture suppliers.So the advantages of custom furniture where, how can we choose to let the satisfaction of custom furniture?
Custom furniture advantage
At present, the market has a large number of custom furniture enterprises. On the basis of mass production, these enterprises will be regarded as a separate market segments for each custom engineering consumers to meet their individual needs. At present, the use of custom furniture are the main form of the dining table, chairs, lockers, screens etc.. Custom furniture for both consumers and manufacturers, the advantages are obvious. Here we mainly look at, for consumers, what are the advantages of custom furniture. Consumer needs are met. Custom furniture according to personal interests put forward for design, design a variety of color collocation, style rich new products to meet different people’s individual requirements of the furniture are popular mass-produced furniture incomparable.
Consumers can control the cost of furniture materials. Custom furniture because of the various parameters of the furniture can be customized, that is, you can control the cost of furniture, that the cost is too high can be reduced. In addition, the vast majority of custom furniture brands are generally looking for suppliers, have good protection materials, and the price is also relatively cheaper, it saves the cost, the price is slightly lower. Different from the common custom furniture to buy finished furniture, consumers and businesses to communicate not only stay in a simple level, but the needs of consumers and businesses the depth of communication, good communication in order to achieve satisfactory results.
Purchase custom furniture should pay attention to
Custom furniture has not yet standardized standards, in terms of materials, environmental protection, price and other manufacturers and consumers of the self appointed. So in the purchase of custom furniture, consumers should consider the following aspects. According to the size of the room to determine the type and size of custom furniture products. If the house area is limited, it is necessary to choose to save space, as simple as possible, the volume is relatively small. To unify with the decoration style. Decoration to determine the style of the home before the purchase of furniture is critical, custom furniture must comply with the overall style of decoration. Pay attention to the rationality of furniture. In the choice of custom furniture, all materials should be consistent with the increase and decrease in the design principles, to take into account the support, practical, beautiful, not wishful thinking to highlight the personality, to focus on rationality.
Custom furniture inspection tips
Customized furniture to meet the needs of the individual, which requires more stringent quality control of the supplier’s products, from the procurement of materials to the process, to the inspection, each step strictly according to the process.
As a restaurant owner, whether novice or seasoned, one thing to consider is your home furniture budget. Although there are countless furniture options to choose from, aluminum furniture has proven to be the best choice.CDG furniture is an aluminum furniture suppliers.
Aluminum furniture is a good choice for restaurants because it is rust-proof and easy to stack and store and easy to clean, and can be stored for long periods in warehouses. As a result of these five reasons, restaurant owners want to maximize the savings in furniture on the expense of aluminum furniture is their ideal choice. Here we talk about the four benefits of aluminum furniture:
1.high-quality aluminum furniture, strong, durable, weather conditions, making it a beachfront restaurant settings and other outdoor settings the perfect choice.
2.easy to clean. Aluminum furniture is known to be easy to clean, which is very attractive to restaurant owners. Simply kneading a damp cloth or applying light abrasives can make your dining room furniture clean and ready for your next customer in seconds.
3.production fast. Restaurant owners can take orders within 4 – 5.5 weeks, because aluminum furniture in the CDG furniture company has a very mature production line.
4.easy to stack and storage. Aluminum furniture can be easily moved from one part of your outdoor dining set to another, due to its light weight and without strenuous effort.
As a result of the four benefits mentioned above, any restaurant owner should consider aluminum furniture when choosing furniture. CDG Furniture Co., Ltd. has a wide variety of aluminum furniture, with competitive prices, will not break the restaurant boss’s budget bottom line.