The outdoor furniture in the dining room has been placed outdoors for a long time and is exposed to the sun and rain. Therefore, it is necessary to purchase the outdoor dining room furniture that has undergone special waterproof, anti-corrosion and sunscreen treatment. Purchasing is one aspect, and nursing is another aspect of extending the service life of the furniture. Now the person in charge of CDG outdoor furniture will introduce the maintenance tips for metal outdoor furniture and rattan outdoor furniture.
Metal outdoor furniture
The commonly used materials of metal outdoor furniture are aluminum alloy and various iron products, which are durable and easy to clean and maintain. However, it is necessary to pay attention to the correct cleaning method to maintain the unique luster of metal. Aluminum furniture is often used for outdoor dining chairs, benches and tables. Before cleaning, please remove all seat cushions and back cushions to clean all aluminum frames. For daily cleaning, gently brush the stains with a microfiber cloth or soft sponge brush dipped in neutral detergent, and then rinse with clean water.
Aluminum outdoor furniture is most afraid of oxidation. If oxidation is found, use metal polishing paste or white vinegar and water in 1:1 ratio to remove defects before cleaning. Avoid using alkaline cleaners such as ammonia, which will cause more serious oxidation.
When rust or paint is found on iron outdoor furniture, gently remove the rust stains with fine sandpaper, and then wipe off the scrap iron with gauze or microfiber cloth dipped in industrial alcohol; Then apply anti rust paint for protection. After the iron outdoor furniture is cleaned, apply a layer of car wax to protect the rust or paint falling places.
In a word, all metal outdoor furniture is afraid of corrosion, so avoid using strong acid or alkali cleaners when cleaning, and avoid scratching the surface protective layer when handling.
Rattan outdoor furniture
The rattan furniture is light, tough, fresh and breathable. When you put rattan tables and chairs outdoors, you will feel a lazy holiday style. It is indispensable furniture in many outdoor courtyards and outdoor dining areas.
Rattan furniture has a variety of natural and plastic materials. Natural materials, such as rattan, rattan bark or bamboo, can absorb moisture in case of rain or wet environment, but their UV resistance is very poor, and they are easy to fade or deform when often exposed to the sun or placed in a high temperature environment. Therefore, it is better to form a habit that when you put it outdoors, you should put it in a place with sunshade on the roof or move it back indoors when not in use.
Rattan outdoor furniture, such as PE rattan, can be moisture-proof, anti-aging, and insect resistant, making maintenance easier. CDG rattan furniture manufacturer recommends that to keep outdoor rattan furniture as beautiful as new, it is best to use a nylon bristle brush to remove dirt and debris. It is easy to judge the softness of the nylon brush. The toothbrush that is suitable for brushing your teeth is also safe for cleaning rattan furniture. For daily cleaning, dust and dirt can be wiped with a wet rag.
More and more people like to shop for metal furniture in the furniture market, from metal indoor dining chairs to metal outdoor dining chairs, from metal dining tables to metal bar furniture. But how can we choose good metal furniture?
1. Look at the material of metal furniture
Metal furniture has the basic combination of metal plus glass, metal plus leather, metal plus solid wood and metal plus cloth. When selecting, pay attention to the material. You can start by touching, observing the color, and viewing the brightness. Good metal products usually have a smooth and flat feel. The material looks more textured, and is not hard to touch. The color is relatively full.
2. Look at the style of metal furniture
When choosing metal furniture, you should consider the overall style of the house. If the home decoration is mainly in cold colors, the selected metal furniture should be solid wood plus metal furniture, mainly in bronze and golden yellow, because in the eyes of people, the cold color is backward and the warm color is forward, so don’t reverse the position.
3. Look at metal furniture technology
When purchasing metal furniture, it is generally necessary to check whether the iron components are well protected against corrosion, otherwise the furniture is easy to rust. Pay special attention to whether the anti-corrosion treatment of the joints between metal materials is well done, and whether there are obvious defects.
4. Look at the details of metal furniture
When purchasing metal furniture, attention should be paid to the details. For example, some furniture will have some patterns, such as petals. At this time, attention should be paid to whether the process is exquisite and whether there are broken lines.
5. See the welding of metal furniture
Generally, the welding points of good metal furniture products will not be exposed. Check the quality of metal furniture and the welding part of the furniture that can be knocked with hard objects. If the quality is good, the general knock marks are basically the same as the color of the coins. If the quality is poor, the color of rust will generally appear.
Take the stress out of matching your table and chairs, with our great value dining packages. We have done the hard work for you and pulled together perfect combinations of timber, metal, upholstered and painted dining sets that will work whatever your style.
With scandi, modern, contemporary, and industrial designs to seat two, four, six, eight or ten people and in round, square and rectangle shapes we should have a solution that works for you. Whether you have a compact room or heaps of space and plenty of people to cater for.
CDG Furniture specialise in metal furniture,it’s a professional dining set manufacturers, supplying different types of commercial dining table set: restuatant dining set, cafe shop dining set, garden dining set…ect.
We CDG is a professional handmade antique finishing furniture supplier, we have our own factory and R&D team, here would like to tell you why buy CDG’s handmade antique metal furniture ?
1.Antique furniture is generally very well made — and made by hand. If it has lasted this long it will likely withstand the daily grind of modern life. Of course, antiques can break and they do carry their own set of rules for maintenance and cleaning. But a table that has lasted through 200 year’s worth of meals is probably pretty well made. Moreover, scuffs and imperfections are often celebrated in antique furniture not dreaded.
2. Antiques are trendproof. While antique pieces are less likely to be super trendy they are also less likely to ever be completely untrendy. If you buy a piece with beautiful lines, curves and construction it is unlikely to offend even the trendiest of trendoids.
3. Constrast is good. Antiques can add texture, energy and personality to even the most modern or contemporary decor. In fact, it is the contemporary room that benefits most from a few antiques. The old pieces cast a new light on the newer pieces — and vice versa. If your living room is chock full of mid century modern, adding an ornate Rococo console table or Gustavian barrel back chair turns a monochromatic (albeit stylish) setting into something truly original and fun.
4. Antiques retain or increase in value. Well-cared for antiques go up in value over time. While prices rise and fall (many experts say that now is the best time to invest in antiques, by the way), antiques are a good investment over the long haul. In some ways a new piece of furniture is like a new car: the new models plummet in value the minute you drive them off the lot.
Are you looking for something unique and interesting to add to your at-home bar, kitchen island or entertainment space? Look no further than this CDG vintage industrial bar stool. Our Iron Bar Stool combines the hardiness of industrial design with the warmth and comfort of a classic vintage aesthetic.
If you have a breakfast nook in your kitchen, then a wrought iron bar stool might just be what you need. They are extremely strong, resist the bend despite the weight on them, which can give you peace of mind. A bar stool can serve as a place to indulge, but it also has other uses. The breakfast place, depending on its size, has room for two or more bar stools.
As the name suggests, you can have breakfast on wrought iron bar stools, or you can read the newspaper. The purpose is the same. A bar stool is usually higher than a regular chair, then a bar table is higher than a regular table. With a breakfast place the same principle applies. It is usually higher than for a dining room table.
Whether you are a little girl at best age or a teenager who loves to soar in the sea of books, or a housewife who likes literature, you dream of having a small garden in your home. In this garden, you can see stars with your family on sunny nights. You can play with children in the morning, and you can talk with your lover in the afternoon. Occasionally, you can enjoy tea in the garden, read a book, or invite a few good friends in your garden and have a pleasant chat.
A fashion new bench for 2 persons ,durable and strong , not need too much space, special handmade finish outlook in your green world , near your favorite plant to make you happy all day.
A small aluminium garden table, put on your garden tools or some flowers and ornaments in it , you can stay in your small garden, happy work, a little sweaty, more energy.
Stylish & Comfortable
Our heavy-duty range of chairs and stools features a durable aluminium frame, finished with a heat transferred wooden finish that is textured and resembles real wood.
For extra comfort, they come with an upholstered seating choise . We have various colors and options allowing you to mix and match.
Where the aluminium frame can weather any conditions,All-aluminium version can be used 100% outdoor.
Solid
These heavy-duty chairs and stools have a solid structure and their strong base will remain stable, preventing sagging the way other materials could do after a few years.
No screw, no weakness. The fully welded frame is much stronger and durable, and will outlast any timber or wicker chair.
Low maintenance
Because of the construction of the frame and the material used, these chairs and stools will not rust, rot, or peel.
You can be sure will not stain any surface and additionally, they will perform in any weather for years and last many years.
Convenient storage and transport
The aluminum frame might be super strong but is also super light! This makes it easier for you to move furniture around and rearrange your sitting area as you go.
Plus, all our furniture is stackable, making it even more convenient to store and transport.
Should any inquiry you have , please be freely contact with CDG.
You will have to do some serious thinking about what kinds of furniture will work best in your space. You’ll also want to look at local business codes and regulations. The fire department or other regulatory agencies might have rules you’ll need to follow in how your space is set up. Here are some other considerations.
Quality – Make sure to consider the amount of wear and tear your restaurant furniture will be enduring. Refrain from buying non-commercial furniture since it simply won’t hold up. Choose furniture that is made for commercial purposes. CDG furniture is a commercial restaurant furniture factory.
Shape – Analyze your space to determine exactly what shape of tables you will need. Who will be eating at your restaurant the most? You probably want to have some larger square tables, a few smaller square tables, and a round table or two. This will depend on the size of your space and how patrons will be moving within the restaurant.
Style – There are two general styles of tables. You can choose to have anchored seating or portable. A booth is a good example of anchored seating. It might be a good idea to have a mix of both. Portable tables are great for extending anchored seating and for having seats in spaces away from the walls.
To get the best quality and different styles of commercial metal restaurant furniture, reach out to us online at www.cdgfurnituregroup.com or by giving us a call at 86-20-36933273.